All pagesMap View

Map View

Switch the inventory view to “Map” to see where each unit probably is right now. A unit's position comes from one of two sources. One is the position your browser recorded when someone scanned a QR label or checked a unit out or in (this page calls it the GPS position). The other is the pin an admin or manager placed on each location. Which one is used depends on the unit's status and on when the position was recorded.

Werp™ is free for up to 3 members and 50 items, with no credit card required. Get started free

Open the map

In the header of the inventory list, use the view switcher (“Grid”, “Table”, “Map”) and choose “Map”. The map first opens at a zoom that fits every unit and location pin it shows. It doesn't update by itself. When you open it again, or come back from another tab or app, it fetches the latest positions if the last fetch was more than 30 seconds ago.

The map view. Units at a location pin are stacked under the location's name; units shown at a GPS position are photo circles ringed in their status color. Nearby units merge into a numbered circle.

Where a unit appears

Each unit appears at one place on the map. Where depends on its status:

Unit statusWhere it appears
Checked out, In use, Assigned, LostAt the recorded GPS position, if there is one, no matter when it was recorded. If there is no GPS position, the unit is not shown on the map. It is not moved back to a location pin.
Available, MaintenanceAt the first of these that applies, in this order: (1) a GPS position recorded after the last return and no more than 30 days ago; (2) the unit's location pin; (3) if the location has no pin, an older GPS position; (4) if none of these exists, it is not shown.
RetiredNot shown.
Units that are out or lost are not moved back to the location pin, so the map doesn't make them look like they're there when they aren't.

Common situations

  • A position was captured on return: it is shown at the place of return for 30 days, then goes back to the location pin (if the location has no pin, it stays at the place of return).
  • No position was captured on return (for example, location access isn't allowed in the browser): the unit goes back to its location pin. If the location has no pin, it stays at the last recorded position (where it was checked out, or where a QR label was scanned while it was out).
  • A stored unit's QR label was scanned: it shows where it was scanned for 30 days, then goes back to its location pin. If the location has no pin, it stays where it was scanned.
  • You changed the status to “Lost” by hand: no position is recorded at that moment. If no GPS position was ever recorded for the unit, it disappears from the map.
  • The QR label was never scanned and the location has no pin: the unit is not shown on the map.
Along with the position, the browser returns an estimate of its accuracy. Werp™ stores that too, but the map doesn't use it: no accuracy circle is drawn, and positions with a large error are shown as they are. Indoors and underground, a position can be off from the real place.

When positions are recorded

A position is recorded only at the moment of the actions below. No app install is needed, and nothing tracks position in the background.

ActionHow it's recorded
Scanning a QR label with a phone (signed-in members)When the QR page opens, the browser gets the position. Werp™ doesn't wait for it: the item page opens right away, and the position is saved once it arrives. Even if no position is available, the date and time of the scan are saved as “Last scanned”. Recording is limited to 200 per 15 minutes for the whole workspace; beyond that, neither “Last scanned” nor the position is saved (stocktake counts are still recorded).
Clicking “Confirm Pickup” or “Confirm Return” in a booking's details (also “Check out all” and “Check in all” on a grouped booking)The position is requested when you click the button. Werp™ waits up to 2 seconds. If none arrives, the pickup or return is recorded without a position.
Clicking “Check in” on the “Units” tab of the item pageAs with booking details, Werp™ waits up to 2 seconds and records the position.
Someone who isn't signed in (for example, a person who found a lost item) scanning a QR labelOnly the date and time of the scan are recorded, and the screen asks whether to share the position. The browser requests the position only if “Share location” is clicked, and the map then lists the source as “Public scan (unverified)”.

These actions don't record a position: booking, extending or ending a booking at a kiosk; “Count” and “Scan to count” on the stocktake screen; changing a status; editing an item or unit; importing from Excel/CSV; showing your current location on the map. If a QR label is read with the phone's camera app during a stocktake, the position is recorded just as in the first row of the table above.

Location permission

Positions come from the browser's location permission. The first time, the browser asks whether to allow it. On pickup and return Werp™ waits only 2 seconds, so if you don't allow it within 2 seconds the first time, that action is recorded without a position and the permission is used from the next action. If you decline, the browser remembers the choice and from then on carries on without asking, with no position. A missing position never stops actions such as pickup or return.

Werp™ has no setting to switch off position recording. If you don't want positions recorded, don't allow location access for werp.in in your browser settings.

Reading the markers

  • Color shows the unit's status: green is “Available”, blue is “Assigned”, orange is “Checked out” or “In use”, and red is “Maintenance” or “Lost”.
  • Units shown at a GPS position appear as photo circles (the ring color is the status). Units without a photo are circles in the status color. When you zoom out and nearby ones overlap, they merge into a gray circle with a number; click it to zoom in and split them. Units that are close on screen without being that near are grouped into a photo stack.
  • Units shown at a location pin appear there as a stack labeled with the location's name.
  • A location that has a pin but no unit to show there right now (for example, everything is checked out) appears as a pin with just the location's name and a unit count.
  • A stack groups units by item and shows up to 3 photos and “+N”. Click it to open that place's units in a list grouped by item.
  • Selecting one unit opens its card. For a unit shown at a location pin, it says “At (location name)”. For one shown at a GPS position, it shows the “Last seen” date and time and what recorded it (“QR scan”, “Check-out”, “Return” or “Public scan (unverified)”).

What is stored, and who can see it

  • For each unit, the latest position is stored (latitude, longitude, accuracy, date and time, and source). Each new record overwrites it, and it never expires.
  • Every record also adds one entry to the history, and entries older than 365 days are deleted automatically. There is currently no screen for browsing the history. Only the latest position is visible: in the map view, and through “View on map” in the Place column of the table on the “Units” tab in the item details. “Last scanned” in the same column shows when it was last recorded (for example “3 days ago”), not the position. “View on map” shows the last recorded position as it is, regardless of how the map view decides.
  • Positions are visible to workspace members who can see the item. Admins and managers can see every unit; members see only the units of items visible to them under Visibility. Public pages seen by people who aren't signed in don't show positions.
  • Deleting a unit doesn't remove its position history right away. Like the rest of the history, it is deleted automatically 365 days after it was recorded.

Set a location pin

Admins and managers create and edit locations under “Settings” → “Locations”. There are three ways to place a pin on the location screen.

  • Type into “Address” and pick a suggestion (suggestions appear after 2 characters). The pin is placed at the chosen address.
  • Type into “Address” and stop typing (it searches automatically after 1.5 seconds), or click “Locate from address”. The address search tries the Geospatial Information Authority of Japan (GSI) first and looks up addresses it can't find there (for example, outside Japan) on OpenStreetMap.
  • Click the map. The “Address” field is rewritten with the address at the pin's position.

The pin is saved when you click “Save”. “Remove pin” takes it off. A location that has units assigned to it can't be deleted, even if those units are retired.

To add only a pin to a place with no address (a rental vehicle or a temporary site, for example), place the pin on the map first, then tick “This location has no address” and save. The map can't be used while that box is ticked, so follow this order.
The location form. Enter an address or click the map to place the pin.

Use cases

Multi-site studios
See at a glance whether a lens is at the main studio or the satellite location before driving over to get it.
Field & rental crews
Gear taken out for a shoot also shows its last recorded position on the map. That means fewer cases where all you see is “Checked out” with no clue about where it is.
Lost equipment
Even for a unit set to “Lost”, if a GPS position was recorded earlier, that position stays on the map. The place where its position was last recorded is a clue for finding it.
Was this page helpful?

Ready to get started?

Sign up for free. No credit card required.

Create your workspace